Lighting 101 - How To Take Care Of Your Lights

Cleaning is a good way of making things pleasant for the eyes, but aside from this, cleaning is essential to make things work to its fullest potential. This is a part of maintaining anything and we even need to clean and re-charge ourselves for us to be able to face everyday stress and work 101% in life. Like other things, lights need this cleaning maintenance too, especially that we used them every day. We need to take care of them in order to provide us the source of light that we need. It is proven that dirt can reduce the light that bulbs or fluorescent gives to a certain space resulting it to a much higher electric bill.

Since lighting fixture is delicate, we have to be careful in cleaning them and providing the safest way possible. In addition to this, we should also need to be aware which can be applicable and not when cleaning lights into a house, an office and commercial functions. You may follow these guidelines on how you can take good care of your lights. 

1.The number one thing that you should consider before starting cleaning your light is the guidelines or instructions from its manual. If you find something like it cannot be cleaned with wet or anything that can harm it, then you’ll become aware with the do’s and don’ts.

2.Set up the materials that you will need for the cleaning process, like damp fabrics and cleaning solution that has a dishwashing liquid. Vinegar or lemon can also be applicable at times to remove stains or white marks. You may also use ladders and other necessary equipment to make the process become easy and handy.

3.Work safely before cleaning the bulbs. You should turn it off and unplug it from sockets. Let the bulb cool down before you start cleaning any of it. Also, check if there are faulty wiring.

4.Get rid of the dust and other dirt that is in the frame of lights. Detached the bulb and put them in a secure place where it won’t fall and be broken.

5.With the use of the solution and a cloth damp, start cleaning the lights and fixtures until all dirt has been removed. Leave it for few seconds and do not let it dry with a cloth that is damp with plain water. Clean it again and finish with a dry one.

6.Repeat this process until all bulbs and lights are cleaned up.

7.After cleaning, you may now get it back to its place. Check if you have attached it correctly and then check the switch. Also, inspect if there are bulbs that aren't already working and replace it with a new one.

Lighting is a must for every home since it gives light and makes everything functional. Cleaning it appropriately is very essential and it takes more attention and knowledge to be able to do it the right way. By having it properly maintained, you can get rid of higher bills and improve your lighting efficiency.

If you want to have an artistic and dependable lights design, lighting installation in Perth is the solution for your lighting needs all you have to do is visit their site at www.lightinginstallationperth.com.au. We will make your light with design that is right for you.

Basic Lighting Installation Perth For Photography

You will be needing a good and stable lighting setup for permanent or temporary indoor photography for consistent result of the photographs. If you can do it by yourself, then fine. But if not, I suggest that you should not take risk in this one because your business depends on it. Getting a local lighting installation Perth who is expert in lighting photography setup is more advisable.

To give you the head ups of what to expect and what you will need, here are the possible things that will require you for basic photography lighting setup.

• At least minimum of 3 lights. Most studios are indoors where rooms are darker so having 3 lights will give your photographs the best effects unless if your studio has enough windows for the natural light to enter the room. So, if you do not have the required number of light then make adjustments and use those windows. If they are around and plenty, make some testing.
  
• If you will be shooting outside you may use 1 light but you require a total balancing of the sun light and the light of the flash from the camera. Using the flash correctly and the natural light is the key for outdoor shooting.
  
• For low-key photography, place one light beside or behind the camera. If the subject is on the left side of the camera, place the light on the right. Behind or beside the camera. This is one of the very important practices of lighting installation Perth in photography and very challenging even for experienced photographer because it gives effect and drama for the photograph.
  
• Next is light in front of the subject. This type of setup is called fill light because this is use mainly for shadow effect and the light is minimal. Though, there are still proper procedures to be applied. Since it is just a secondary light or a supporting light, you have to position it lower than the main light. Adjust the light if you want more shadow.
  
• Rim lighting is another style in photography. Its purpose is to separate the subject from the background. This is also use if you want to give emphasis or bring out the subject. Example, shooting a small object. Do this by positioning the rim light below or above the subject. You should not apply this kind of effect if you want the background to blend with the subject.

Now you have all the basic information on setting up the lights for your photography business. Once they are all setup, play with them. Move the lights away or closer the object for the kind of effect you want. Camera flash also plays an important part so you have to do some testing. Try every angle, how lower or higher, the distance, etc.

Our business is very important and photography is not just about it. It’s an art so you have to choose the best lighting effect for your work. Choose the best lighting installation Perth, WA that has been in the business for years for your complete lighting solution.